Today I signed a drawing to be sent for engineering for the house slab. Not sure how long it takes to hear anything back about that.
I've been thinking about the garage doors again though. The builder originally specified 2100 doors and I've asked him to go as tall as possible. He's gone to a 2400 door as that's the biggest he can supply in a panel door at the front, although I'm happy for a roller if one can be done in a fashion that allows a single wide door and remote control.
We've got just under 2800mm to the eaves and 3000mm to the internal ceiling, a roller door for 3000mm is going to take up about 500mm when closed so won't really gain us much.
I've emailed my shed guy as I vaguely recall him mentioning doing garage doors as well as shed kits, hopefully he will have an option for me.
The only reason I'm worried about it is that it's something that's not going to be super difficult or expensive to do now, but to retrofit later would be an issue. Currently I have nothing that'd struggle to fit in but if I ever get a boat, non pop-top caravan, 4x4 etc that I need to get to the shed to work on, I'd hate to have to rip out and throw away both garage doors and re-do the lintel etc for clearance.
This is also a factor for resale, it's one thing to have a whopping great shed for someone who wants a workshop, and another entirely to offer it as a space to store a caravan and a boat, with room for storage as well - something hard to do if said items can't get through the house garage to get there!
The driveway has ended up being a rise of 590mm over 6000mm on the uphill side and 1100mm over 6000mm on the "downhill" side. Still a little steeper than I'd really like but it should be live-able. The full width front door will mean I can take it on an angle if break-overs become an issue with race cars; plus with the door heights correct I should be able to just drive through with a car on a car trailer so clearance won't be such an issue for a lowered race car - I won't need to load and unload on the street!
Tuesday, March 8, 2016
Sunday, March 6, 2016
Our House Build - Windows, Doors and Shed Renders

Drew the shed to scale, the structure isn't 100% correct but it shows enough detail for rendering views out of the house.

A&L windows don't have sketchup models of their windows however with some tedious work I was able to move them from the revit models they have and re-size each type to suit my window sizes. These should be pretty close to the true thing. The best part is the model includes the brick sill (although I don't have a suitable texture!!) which is pretty cool!

The view from the garage looking up the hall - it's a bit dark in this shot but that's because I haven't put doors on the garage yet.

Looking out towards where the shed will be (this is after I'd done the windows, but before I'd modelled the shed!)

Whole site aerial view

Interior, wide angle of view.

Front door, BAL12.5 Corinthian PMAD104 painted in Dulux Orangeade. No handle yet, I know!

Rear door done as well

Sketchup allows you to vary the field of view, this is probably a bit closer to about 24mm on a full frame camera. Click the image to get a bigger version by the way - I've put a bit of a retaining wall and some stairs in here...

One option, a slight step down.

With the backfill layer still turned on, this is another option with a sunken seating area or similar with a bigger retaining wall for the lawn.
Saturday, March 5, 2016
Our House Build - More Renders

One of the coolest things about sketchup (or any 3d modelling program) is the ability to turn off elements of your home so you can get a better feel for where spaces sit in relation to one another. Here I was working with the walls turned offto complete the skirting and architraves and couldn't help but run a quick render.

I went through the drawings and added all the openings. I had some initial issues because I forgot that the bottom course of bricks is below the floor height; easily enough resolved though it did mean re-adjusting the heights of a couple of windows & doors once I worked out what was going on!

I modelled more of the graded slopes on the basis of the surveying heights, I've had to assume a couple of gradients continue on at a steady slope to the corner of the backyard as for whatever reason the site survey only goes just past the building envelope.

This allowed me to draw a drive-way and shed location. In this drawing I've cut the shed into the slope so the floor at the door end is level with the rear boundary, this may mean a couple of retaining walls on the north boundary although that depends more on if the slope actually continues at the same gradient (from memory it is definitely similar to this)

From down near ground level the house will look quite imposing I think.

This shows the relationship of the house and shed (or shed slab at least) compared to the block gradient.

I had messed up part of the height at the rear of the garage. here I've fixed it and put in some fences to get a better idea of what you can/can't see over them. I've used a 1500mm fence all around.

I got some light models from the 3D Warehouse - standard CFL battens, 3 IKEA pendants, and a complement of fan/light combinations for the rooms where specified. I still need to find a model for the downlights in the theatre. The image above took a very long time to render though because I've turned on some reflections in the surfaces as well as some minor bump maps.
Friday, March 4, 2016
Our House Blog - New Renders
So I started drawing the house again from scratch using the dimensions from the builder's plan.
This is the laundry (colours/finishes still to be confirmed!)

I've done the lights using the electrical plan layout too, although I'm still getting the hang of using Twilight's lights so it may not be quite right, I also need to get some 3D batten and downlight/pendant models to put in the same place as the lights themselves too.
Below is the theatre room, note I've not drawn any doors or cavities yet, although I've done the correct sized cornice and skirting boards/architraves.

It's amazing how much difference the architraves/skirting makes, here's a shot with just the cornice (although not on the bulkhead above the kitchen cabinets):

And the same with the architraves and skirting - I haven't put any windows in the model yet which is actually making it render much faster so I'll keep working this way for a while! Again the colours and finishes aren't yet confirmed, but this will allow us to play with them to work out where we want/need to be when it comes to that.

Entryway timber screen, this hasn't been drawn with any dimensions etc by the builder yet so I'm trying to nut out what height it needs to be at etc - I've matched it to the kitchen benchtops for now.

Looking from the garage/entry point we will typically use, towards the living room.

This is using the site survey ground heights at the corners; I haven't done contour lines as the cut and fill will mean very little natural ground level will remain, hence I've rendered with a rock/dirt texture the backfill areas:
This is the laundry (colours/finishes still to be confirmed!)

I've done the lights using the electrical plan layout too, although I'm still getting the hang of using Twilight's lights so it may not be quite right, I also need to get some 3D batten and downlight/pendant models to put in the same place as the lights themselves too.
Below is the theatre room, note I've not drawn any doors or cavities yet, although I've done the correct sized cornice and skirting boards/architraves.

It's amazing how much difference the architraves/skirting makes, here's a shot with just the cornice (although not on the bulkhead above the kitchen cabinets):

And the same with the architraves and skirting - I haven't put any windows in the model yet which is actually making it render much faster so I'll keep working this way for a while! Again the colours and finishes aren't yet confirmed, but this will allow us to play with them to work out where we want/need to be when it comes to that.

Entryway timber screen, this hasn't been drawn with any dimensions etc by the builder yet so I'm trying to nut out what height it needs to be at etc - I've matched it to the kitchen benchtops for now.

Looking from the garage/entry point we will typically use, towards the living room.

This is using the site survey ground heights at the corners; I haven't done contour lines as the cut and fill will mean very little natural ground level will remain, hence I've rendered with a rock/dirt texture the backfill areas:
Wednesday, March 2, 2016
Our House Build - mFLOR render
mFLOR have a collection of high resolution rendering textures, so I used one with my existing drawing (and copious amounts of downlights) to see how it changes the space. I have the builders plans with dimensions now so I can re-draw for a more accurate render; which I've already started doing.
This is their mFLOR Argyll Fir - Glenmuir finish/colour.
Our House Build - Builder Visit Debrief
Wow. Plenty to take in tonight! I should mention how great it is that our builder is flexible enough to meet us at 5.45pm and hang around as long as it takes. Sarah and I both work in sales roles ourselves and can't easily co-ordinate time off during the day so this is super helpful in allowing us both to be there!
First surprise - our block has 3.35m of fall across the front. Umm. There's proof I have no idea how high things are by looking at them, and that I can't assume the height indicated by contour lines... whoops! The builder has drawn the house 1.335m cut from the north boundary (although this doesn't conceal any windows as the block drops close to a meter to the rear or east boundary, and it is tallest at the ensuite which doesn't have any windows facing north).
The next is our site is BAL12.5. Because we've chosen (so far, at least) Colorbond roofing, we're looking at $1780 to upgrade to BAL12.5. This is the only itemised cost listed, although I'm told the flyscreens are aluminium instead of fibreglass as well to resist ember attacks. Bugger.
Gas central heating is costed around $3,000 and if we want to add a single split system its just under $3,500. I think given what I've worked on we will probably do inverter central heat and air instead as it's a pretty marginal difference. It's probably best to do this directly with the business rather than through the builder. My mortgage broker tells me we should be ok for up to 20% of the total build to be done via suppliers other than the builder; but that it's easier to use the builder where possible.
Some other itemised "extra" costs:
Good surprises:
Things for me to remember:
Once I add the shed costs, we're about $36,000 over our original pre-approval amount. Add the estimated cost of the retaining wall and we probably need to ask for another $40,000. Good thing we've continued saving so should have enough deposit to cover that by the time we get to that point in the process.
There are still some other factors to consider;
First surprise - our block has 3.35m of fall across the front. Umm. There's proof I have no idea how high things are by looking at them, and that I can't assume the height indicated by contour lines... whoops! The builder has drawn the house 1.335m cut from the north boundary (although this doesn't conceal any windows as the block drops close to a meter to the rear or east boundary, and it is tallest at the ensuite which doesn't have any windows facing north).
- This will mean I need a retaining wall around 12m long and approx 1.2m high at a very approximate $250/m2 or around $3600!! I'll need to get a few quotes/options there I think.
The next is our site is BAL12.5. Because we've chosen (so far, at least) Colorbond roofing, we're looking at $1780 to upgrade to BAL12.5. This is the only itemised cost listed, although I'm told the flyscreens are aluminium instead of fibreglass as well to resist ember attacks. Bugger.
Gas central heating is costed around $3,000 and if we want to add a single split system its just under $3,500. I think given what I've worked on we will probably do inverter central heat and air instead as it's a pretty marginal difference. It's probably best to do this directly with the business rather than through the builder. My mortgage broker tells me we should be ok for up to 20% of the total build to be done via suppliers other than the builder; but that it's easier to use the builder where possible.
Some other itemised "extra" costs:
- Supply and fit basic ceiling fans in place of normal batten fix lighting - $792 for 6
- Hot water continuous loop - gas boosted solar instant system - $937.20
- NBN connection $720 (FTTH, this will beat the hell out of 5Kbps DSL2 sync we currently hit)
- Smart Stone benchtops - $4,293.85
Good surprises:
- Brick upgrade to Mocha from standard inclusion - $888.62
- External gas connection for BBQ - $198
- Window upgrade to Scarlett's room shouldn't cost anything as the bricks cost and window cost should cancel each other out.
- Most of the tiles we like are in the inclusion level we've been quoted.
- The builder will provide the screen in the entry way at no cost - from hardwood 32mm vertical beams, stained.
- Driveway crossover will be included in site costs
- This price includes the butlers pantry
Things for me to remember:
- Carpet inclusion - we probably need to step up one level to get a carpet finish Sarah likes; alternatively price external suppliers.
- There's no costings done for render. This isn't overly necessary as we can always add that later if we dislike a complete brick facade. The builder would prefer to use the same brick all round for logistics so we don't save any brick cost by going a cheaper brick to render over.
- The wider panels of sliding door don't have flyscreen as they can't make a fixed one in the size we want. We can always retrofit the A&L retractable units for around $1000 a door later.
- Sarah wants/needs a door on the shower screen in the ensuite - the current drawings don't show this and it'll cost a bit more - the current side screens will likely need to run to the roof to limit flex.
Once I add the shed costs, we're about $36,000 over our original pre-approval amount. Add the estimated cost of the retaining wall and we probably need to ask for another $40,000. Good thing we've continued saving so should have enough deposit to cover that by the time we get to that point in the process.
There are still some other factors to consider;
- We haven't allowed for any fencing, I probably should organise some quotes to at least have an idea for that. We've got neighboring owners (although no building works yet) on our north and east sides, and one of the two blocks that back onto our south boundary looks to have been sold; so at least we're likely to only have to worry about half the cost of the fences.
- We haven't allowed for landscaping. That can wait. Grass seed will have to do for a while; unless people want to bring us a few m2 of turf each as a house warming gift!
- The garage floor had only been dropped about 100mm. I've insisted that even if it costs a little more (there will be a few more brick courses at the bottom, we need to drop it by 300mm to allow close to 2400mm door openings; for drive-through to the backyard shed. This will also level the driveway out a little; the fill at this end of the block is between 1 and 1.6m from one side of the shed to the other, so dropping the floor height for the shed by 200mm means for a relatively gentle slope, especially on the side that goes through to the back yard (13% to 23% from one side to the other)
The most upsetting news is that over the top of everything above, we're looking around $10,000 to do polished concrete. The default quote is for vinyl plank flooring (mFLOR is the product the builder uses and recommends). Despite the fact polished concrete on its own would add around $4500 to the standard inclusion we've got to accept that the builder needs to allow for other factors such as harder concrete (spec from concrete polishers is 32MPA, builder would prefer to use at least 40MPA, but they have to do this for the entire slab pour, it's harder to work because there is less water added and an elasticiser) and then protect the surface, avoid nailing supports to the slab and just generally work other trades around the floor surface, so the extra cost is
Initially my thoughts were why not go to a large format tile; however that's an increase of $2,000 over where we're at for our floor area, plus Sarah hates the idea of trying to keep the grout clean. I am not super keen on timber floating floors because they're noisy, and thankfully the vinyl floors aren't like that (we've seen a few in display homes). My first concern for our application was thermal resistance.
A study of the website states they're compatible with under-floor heating - viola - 0.010m2K/W-0.013m2K/W (or R-value) depending on the product thickness. Compare this with ceramic tiles at approx 0.012m2K/W or natural stone tiles at 0.017m2K/W and the vinyl planks (at least in thin form) are actually still a good option. (For passive solar, you want heat to freely transfer between the sun and your thermal mass, then back from the thermal mass to the room - in our case the thermal mass is the slab)
At this point I think the vinyl floor is the way we will go- I think we'll need to go with a dark, fairly neutral colour to leave our options open for wall colours and to ensure good heat absorption from the winter northern sun exposure.
Tuesday, March 1, 2016
Our House Build - Shed Slab
First quote for the shed slab came back, $1500 over the estimate from the shed people.
Not surprising given the slope of the block though, and the quote also includes thickening in the center for a hoist.
Here's the current costs for the shed:
Not surprising given the slope of the block though, and the quote also includes thickening in the center for a hoist.
Here's the current costs for the shed:
| Item | Cost |
| Shed Kit | $12,130.00 |
| Variation – 5.1m w roller door | $385.00 |
| 100mm slab, f72 mesh, 12of 300x300x300 footings, 15x7m | $8,525.00 |
| Building Erection | $3,600.00 |
| Power to shed/sub board | $1,750.00 |
| $26,390.00 |
I should point out this includes only a single GPO and a light. Other power and lighting will have to be added later.
We could build it ourselves, but then we need to register as an owner builder, apply for a building permit for the shed separately, and if we sell within I believe 7 years we have to warrant the construction of the shed up to 7 years from when it went up.
Subscribe to:
Posts (Atom)
