Tuesday, March 22, 2016

Our House Build - Selection Day!

Given the amount of information I seem to have been collecting through this process, would you believe I only managed to take a single photo during our selection appointment today?

This is it;


Basically just confirming my original colour scheme and what I've been doing in SketchUp - monument gutters and fascias, basalt roof, Boral Horizons Mocha bricks. We saved a huge amount of time by already having made these decisions!

The only change was off white mortar (I hadn't specified anything previously) in an ironed finish, and colourbond dune for the porch render. It's only a small section of render so it should look good being the lighter colour and will break the width of the house up a little.

We've specified pretty standard round PVC downpipes and quad matched to the bricks, but we haven't specified a colour for the downpipes, meter box and eaves so I've emailed them and asked what we need to do there.

The builder had a new facade option for us to look at which we liked, with some small adjustment - the porch will now be much shallower, but will be wider. This will mean even with the render I believe it should work out cheaper. The windows at the front of the house will be taller with a single awning sash to one side and a bigger fixed glass section in the A&L windows boutique frames (the same as our sliding doors - a bigger, bolder semi-commercial style frame). Jarrod (the owner of Warrnambool Builders) is going to cover the cost of getting the energy rating re-done with the new window design as the changes were his idea (he'd prefer to build a nicer looking house - how good is that?)

The beauty of the whole selection process with a smaller custom builder (or specifically Jarrod and his team at Warrnambool Builders, if you're lucky enough to be building in an area they service) is the ability to have in one place at one time the selection specialist, builder/estimator and drafter (many of these hats are worn by a single person!) and as such you can ask "how much to change that carpet" or "what if we run the tile to the ceiling" and get an accurate answer on the spot, rather than a drawn out process that runs to weeks as I've seen mentioned numerous times on other's build blogs and threads on homeone.

Now the rest of this post is going to be a rough play by play - we don't yet have a copy of the selection decisions we made on the day but all of the swatches were photographed as we chose them and will be presented to us in a document which I'll share in some fashion on here once we have a copy. As a result I may be taking a semi-educated guess at the selections we made (especially those that Sarah decided on rather than myself!)

Firstly, flooring. The mFLOR system has a few colours available in the Victoria Plank collection - we chose I believe one of the more neutral colours in an oak finish although I don't recall the exact shade, possibly martinsyde oak:


We then asked if it was possible, and chose a second vinyl plank for the underside of the kitchen island bench; a nice contrast to ebony:


We have gone I believe a polytec melamine in a gloss white; although the gloss sample was missing, so we haven't 100% confirmed this until we can verify with a sample - for all the kitchen cabinetry. Originally we'd tried honey elm and sublime teak but all seemed to clash with the floor finish when comparing the materials side by side.

Hopefully it will look something like this (although this is something called ultra-glaze, so we still need to confirm):


Overhead we have no handles and on the botom doors the handles are actually very similar to the image above - a brushed satin chrome style finish.

We've gone for Dulux Dieskau for the walls


Vivid white in semi gloss for the trims, in a normal low sheen for the ceiling.

Tonight we decided to do all four walls in the theatre room as Timeless Grey


We've gone a charcoal carpet-  we actually upgraded to their second level carpet as the pile is just a bit thicker. The builder uses a standard underlay that's much thicker than what most volume builders use which is nice, but Sarah feels the thicker carpet will last longer and feel nicer. It's also only $800 to do the upgrade so like the bricks, a bit of a no-brainer.

We're happy with standard cornice and architraves/skirting so I didn't even attempt to look at the options there.

The walk in robe I've been rendering in a laminex or coloured melamine, the spec only shows it as standard (boring) white - I've asked how much it would cost if we wanted to choose something else but it might be easier to stick with white given that will allow it to be added to or adjusted very easily and cost effectively down the track.

I added a couple of rear LED flood lights to the rear garage PA door and the laundry external door, as well as putting the lights for the garage and laundry on a double switch setup at the external doors; this is mainly for entry/exiting to the shed at night or for washing cars at dusk or in the afternoon in winter. Not sure yet what they'll cost but I'm sure they'll be invaluable.

Bench tops in the kitchen (yes I'm aware I'm jumping around a bit here, I'm just writing it down as I think of it - I've mentioned before this is as much my diary for this process as it is a record for anyone else interested in the process!) are to be smart stone arcadia (I believe, although will confirm once we get our selection document!):


- we've chosen a matching gloss laminate for the butlers pantry bench tops; although I've got no idea of it's name or even brand.

For the laundry and powder room bench we've gone a calacatta marble style laminate, with the gloss white cabinet doors and handles matching the kitchen. The main reason for this is because the vinyl plank floor continues through from the living room, and again we didn't want to have too much going on.

In the bathroom we've gone a charcoal tile, which we've also used in the ensuite. This tile matches to the vinyl and the carpet, so it will flow quite well in both cases. Our original choice is no longer made (although they still had the sample) but there's another from a different range that's very similar. The big benefit is that it's the same size as the wall tiles we've chosen which is a concrete style large format tile, so the grout lines will line up. For the grout we've chosen the closest colour to a match for each tile so it should just disappear rather than be too contrasty. We're also going to run the concrete style tile as the splashback each side of the window in the kitchen, for the bath hob (top and side) in main bathroom, for the splashback beneath the vanity in the laundry, bath, ensuite, powder room and maybe even the butlers pantry. I can't be sure because at one point we chose a very basic white tile for all of this but then changed our mind!

My head started to turn to mush toward the end and I can feel it happening again as I try and recall this part of the process. I think I said to someone when I got back to work that if anyone asked me about tiles for the rest of the day I might kill them with one!

We haven't specified a material for the adjustable shelving in the butlers pantry (or I don't think we did) or finish/stain for the entry way slats.

We chose white doors for the kids robes and white for our blinds.

Sarah conceded to Orangeade for our front door. I've ordered an A4 sample sheet from dulux to make sure we don't actually hate it as despite being my idea, I'm still not 100% convinced. I don't want red (it's done to death by countless others) but I don't just want it bland and to just go monument like most of the other bits of the house.

Speaking of monument, the rear roller garage door will be monument, as will the front panel lift door which will be horizontal line profile but just plain monument colour.

I'm going to get Jarrod to price the retaining wall to be done by a contractor, but for him, mainly so we can finance and do building permit for the wall with the rest of the build. We'll still do the groundworks ourselves though.

Anyway, I'm off to email poor Kellie at Warrnambool Builders a bunch more questions!

Our House Build - Sketchup - More Renders

Just playing around last night killing a bit of time while Sarah was out of town, added an approximation of my MX-5 to the garage:


and some furniture to the bedrooms:


and textured the inside of the wall "cavity" - in reality this is only drawn down about 100mm but the shadow and black bottom make it look full depth. It's easier this way because it doesn't interfere with the door or window openings.


Sunday, March 20, 2016

Our House Build - Sketch Up - More Furniture



Doing some more furniture modelling, here's my existing TV modelled (Samsung 50" plasma) and existing entertainment unit, as well as existing speakers and down-firing (home made) home theatre sub-woofer.



I also modelled (albeit roughly) the dimensions of our existing lounge which we plan to replace shortly after moving in - mainly because they're almost stuffed - the foam is gone in all of them, and they don't really fit the space or style we're looking for.



Here it is, with our existing table modelled for size.





And here's the "new" lounge and table layout (proposed)



Decided that if I'm going to be doing renders without the roof/ceiling I should draw some detail at the top of the walls - stud tops and bricks with a cavity. Since this render I've changed the textures each side of the cavity (so they're not just black) to give it a bit more detail again.

Saturday, March 19, 2016

Our House Build - Sketchup - Adding Furniture

We have a selections appointment early next week, so there haven't really been any changes bar getting an email informing us that we need some double glazing to reach the mandatory 6 star energy rating. I don't yet know what that's going to cost so once I do I'll post more on that.

In the meantime, to better visualise the spaces I've started drawing up some furniture in similar dimensions to items we have, or plan to purchase.



The first is my computer desk. I built this years ago to handle 2x 24" widescreen displays, a hutch for the computer as well as plenty of space around keyboard, mouse etc for drawing/reading documents etc. It's come in very handy during this drawing process!! I had a sketchup model for it (it's one of the first things I made) but I don't know where I saved it, but it didn't take long to re-make now I'm all over how sketchup works!



Here it is placed in the theatre room, this will likely be its temporary home until I can fit out a small office in or at the rear of the shed. Originally we'd planned a study off the garage; but this proved cost prohibitive.



Next was our entertainment unit. I'll try and remember to take some more shots of the unit itself, it's got an LED strip in it and is designed to look as if the central section is floating. We've had it for quite a while. It will likely end up in the theatre room but for a start my anticipation would be that it will be placed in the living room.

The couch is a rouch approximation of the focus on furniture "enterprise corner" - something we plan to get in the fairly short term after building (although we will see what happens!)



I had the ceiling and roof turned off for rendering as it made the process much faster than with the lights on (and leaving the roof/ceiling on with lights off meant for very dark renders!)



This table is a rough idea of something I'd love to hand make. It's 3m long and just over 1.1m wide, in a farmhouse harvest style. Dimensionally I just used 90x35mm timber to build it in sketchup; so it's a practical concept that could be build reasonably cheaply then painted/stained even just as a temporary table. Down the track we'd love a live edge timber slab based table, although commercially purchased these are exorbitantly expensive!

We're also in the process of trying to organise our cut and fill. We'll be doing this part ourselves to save some dough, although we will need a retaining wall on the north boundary which may involve some intricacies - because it's on the boundary and 1.2m tall it will need engineering; plus because we're doing the work ourselves we will likely need a separate building permit - obviously if it works out not much difference in cost to have the builder do the retaining wall it would be much easier to do as part of the build and finance it as such!

Tuesday, March 8, 2016

Our House Build - Engineering Signed

Today I signed a drawing to be sent for engineering for the house slab. Not sure how long it takes to hear anything back about that.

I've been thinking about the garage doors again though. The builder originally specified 2100 doors and I've asked him to go as tall as possible. He's gone to a 2400 door as that's the biggest he can supply in a panel door at the front, although I'm happy for a roller if one can be done in a fashion that allows a single wide door and remote control.

We've got just under 2800mm to the eaves and 3000mm to the internal ceiling, a roller door for 3000mm is going to take up about 500mm when closed so won't really gain us much.

I've emailed my shed guy as I vaguely recall him mentioning doing garage doors as well as shed kits, hopefully he will have an option for me.

The only reason I'm worried about it is that it's something that's not going to be super difficult or expensive to do now, but to retrofit later would be an issue. Currently I have nothing that'd struggle to fit in but if I ever get a boat, non pop-top caravan, 4x4 etc that I need to get to the shed to work on, I'd hate to have to rip out and throw away both garage doors and re-do the lintel etc for clearance.

This is also a factor for resale, it's one thing to have a whopping great shed for someone who wants a workshop, and another entirely to offer it as a space to store a caravan and a boat, with room for storage as well - something hard to do if said items can't get through the house garage to get there!

The driveway has ended up being a rise of 590mm over 6000mm on the uphill side and 1100mm over 6000mm on the "downhill" side. Still a little steeper than I'd really like but it should be live-able. The full width front door will mean I can take it on an angle if break-overs become an issue with race cars; plus with the door heights correct I should be able to just drive through with a car on a car trailer so clearance won't be such an issue for a lowered race car - I won't need to load and unload on the street!

Sunday, March 6, 2016

Our House Build - Windows, Doors and Shed Renders



Drew the shed to scale, the structure isn't 100% correct but it shows enough detail for rendering views out of the house.



A&L windows don't have sketchup models of their windows however with some tedious work I was able to move them from the revit models they have and re-size each type to suit my window sizes. These should be pretty close to the true thing. The best part is the model includes the brick sill (although I don't have a suitable texture!!) which is pretty cool!



The view from the garage looking up the hall - it's a bit dark in this shot but that's because I haven't put doors on the garage yet.



Looking out towards where the shed will be (this is after I'd done the windows, but before I'd modelled the shed!)



Whole site aerial view



Interior, wide angle of view.



Front door, BAL12.5 Corinthian PMAD104 painted in Dulux Orangeade. No handle yet, I know!




Rear door done as well



Sketchup allows you to vary the field of view, this is probably a bit closer to about 24mm on a  full frame camera. Click the image to get a bigger version by the way - I've put a bit of a retaining wall and some stairs in here...



One option, a slight step down.





With the backfill layer still turned on, this is another option with a sunken seating area or similar with a bigger retaining wall for the lawn.

Saturday, March 5, 2016

Our House Build - More Renders



One of the coolest things about sketchup (or any 3d modelling program) is the ability to turn off elements of your home so you can get a better feel for where spaces sit in relation to one another. Here I was working with the walls turned offto complete the skirting and architraves and couldn't help but run a quick render.



I went through the drawings and added all the openings. I had some initial issues because I forgot that the bottom course of bricks is below the floor height; easily enough resolved though it did mean re-adjusting the heights of a couple of windows & doors once I worked out what was going on!



I modelled more of the graded slopes on the basis of the surveying heights, I've had to assume a couple of gradients continue on at a steady slope to the corner of the backyard as for whatever reason the site survey only goes just past the building envelope.



This allowed me to draw a drive-way and shed location. In this drawing I've cut the shed into the slope so the floor at the door end is level with the rear boundary, this may mean a couple of retaining walls on the north boundary although that depends more on if the slope actually continues at the same gradient (from memory it is definitely similar to this)





From down near ground level the house will look quite imposing I think.



This shows the relationship of the house and shed (or shed slab at least) compared to the block gradient.



I had messed up part of the height at the rear of the garage. here I've fixed it and put in some fences to get a better idea of what you can/can't see over them. I've used a 1500mm fence all around.



I got some light models from the 3D Warehouse - standard CFL battens, 3 IKEA pendants, and a complement of fan/light combinations for the rooms where specified. I still need to find a model for the downlights in the theatre. The image above took a very long time to render though because I've turned on some reflections in the surfaces as well as some minor bump maps.